รายละเอียดสินค้า |

SET530R3 Specifications:
- Telescope Fully transmitting, Coaxial sighting and distance measuring optics.
- Magnification 30x
- Resolving power 2.5″
- Field of view 1°30″ (26m/1,000m)
- Minimum focus 1.3m (4.3ft)
- Angle measurement Photoelectrical absolute rotary encoder scanning. Both circles adopt diametrical detection.
- Unit H&V Degree / Gon / Mil, selectable
- Display resolutions H&V 1″ / 5″, 0.2mgon/1mgon, 0.005 mil, selectable
- Accuracy (ISO12857-2 1997) H&V SET530R3 – 5″ (1.5mgon)
- Measurement mode H:Clockwise / Counterclockwise, 0 set, Hold, angle input, repetition, available V:Zenith 0°, Horizontal 0° ±, slope in %, selectable
- Automatic dual-axis-compensator Range: ±3′ (±55mgon), “out-of-range ” warning display provided
- Distance measurement Modulated laser, Laser diode, Coaxial EDM transmitting and receiving optics (IEC Class 3R, FDA Class 3R laser)
- Maximum measuring range A: Average conditions: slight haze, visibility about 20km (12miles), sunny periods, weak scintillation. B: Good conditions: no haze, visibility about 40km (25miles), overcast, no scintillation.
- Reflectorless *1A SET230R3/SET330R3/SET530R3 – 350m (1,140ft.)
Accuracy
- Reflectorless *1 .3 to 200m: ±(3 + 2ppm x D)mm Over 200 to 350m: ±(5 + 10ppm x D)mm
- With reflective sheet ±(3+ 2ppm x D)mm - With AP prism ±(2 + 2ppm x D)mm
- Measuring time Every 1.3s (initial meas. 2.6 s)
- Measurement mode Fine meas. (single/repeat/average) / Rapid (single), Tracking
- Laser Wavelength: 635 – 690 nm, Max. output:0.99mW
- Data storage and transfer
- Internal memory About 10,000 points
- Memory card unit*2 Optional. The 8MB CF card stores approximately 72,000-point data
- Scale factor setting 0.5 to 2.0
- Interface Asynchronous serial, RS-232C compatible, baud rate : 1,200 to 38,400 bps
- Printer output Centronics compatible (w/ optional DOC46 printer cable)
General
- Laser-pointer function ON (automatic off 5 minutes after operation) / OFF, selectable
- Display type Alphanumeric/graphic dot matrix LCD (192×80 dots)
- Keyboard (15keys) On both faces
- Wireless keyboard Optional
- Sensitivity of levels
- Plate level SET230R3 – 20″ 2mm SET330R3/SET530R3 – 30″ / 2mm
- Circular level 10′ / 2mm
- Graphic LCD level 3′ outer circle
- Optical plummet Image: Erect, Magnification: 3x, Minimum focus: 0.3m (0.98 ft.)
- Water and dust resistance Conformity to class IP66 (IEC60529)
- Operating temperature -20°C to +50°C C (-4°F to +122° F)
- Tilting / Trunnion axis height 236 mm (9.3 in.) from tribrach bottom, 193 mm (7.6 in.) from tribrach dish.
- Size with handle and battery W 165xD 170x H 341 mm (W 6.5 x D 6.7 x H 13.5 in.)
- Weight with handle and battery 5.4kg (12lb.)
- Power supply – Operating voltage: 7.2 V DC
- BDC46A detachable battery Li-lon rechargeable battery
- Continuous use*3 About 5.5 hours (About 650 points)
- Recharging time Less than 2 hours with CDC61/62/64
- Battery level display 4 steps with warning message
- Automatic power cut-off 30 / 15 / 10 / 5 minutes after operation / OFF, selectable
- Resume function ON / OFF selectable (backed up for about 1 week)
|